PRODUCTS

Wafer Type Vortex Flow Meter
Wafer Type Vortex Flow Meter
February 3, 2021
Pressure Device
Pressure Device
February 3, 2021

Temperature and Pressure Compensated Type Vortex Flow Meter

  1. Mainly used for steam, gas, water
  2. With 4-20mA, RS485, HART output
  3. Easy to install and maintain,shock resistant
  4. Various structural forms, flange type, wafer type,insertion type.
Category:
Description

Description
Vortex flow meter is one kind of velocity type flow meter, it’s based on Karman vortex theory and adopts piezoelectric crystal to detect the burble frequency of the fluid caused by flowing through the triangular prism in the pipeline and then measure the flow of fluid. It is widely used in petrol, chemical industry, light industry and power heat supply and so on.

Benefit
Integrated pressure and temperature compensation.
4-20mA, pulse with HART; Optional pulse with RS485
Wide temperature range up to highest temperature 350
Adopt Japan OVAL technology and design
Embedded sensor, 4 piezo-electric crystal encapsulated inside the sensor.
No moving parts, no abrasion, non-wearing parts inside, fully welded SS304 body (Optional SS316)

Standard Specification
Size : DN15-DN300mm
Accuracy : ± 1.5%(standard),± 1.0%(optional)
Power Supply : 24VDC
Communication : RS485/Modbus, Hart, Profitbus
Flange Standard : EN1092-1 PN10,PN16,PN25,PN40
ANSI BS16.5 Class 150,300,600 JIS2220 10K,20K,40
Straight Pipe : Inlet Path ≥ 12D,Outlet Path ≥ 5D
Signal Output : 4~20 mA,pulse
Frequency Output : 2~3000 Hz
Relative Humidity : 85%
Explosion-proof : Exia IIC T6 Gb
Ambient Temperature :-40~55(Non Ex-proof Place)
-20
~55(Non Ex-proof Place)
Nominal Pressure : 1.6 MPa, 2.5 MPa, 4.0 MPa
Protection Grade : IP65
Velocity : 0.4~7.0 m/s liquid
4.0~60 m/s gas
5.0~70 m/s steam
Body Material : SS304(Standard),SS316(Optional)
Resistance Coefficient : Cd 2.6
Oscillatory Acceleration: 0.2g
Reynolds Number : 2×104~7×106